datasheetdetails
|
<< | < | AX-CN-STx - Enclosed multistage Controller
|
|
The Axio AX-CN-ST is a four or six stage on/off controller with a two line LCD display to simplify setting up. The unit controls temperature between -10°C to +110°C using configurable heating and cooling stages. The set point can be adjusted locally using push buttons or remotely with a 1-11kO potentiometer. A setback input is provided for use with an external switch. The minimum and maximum temperatures values are stored for display via the menu. The AX-CN-ST is provided in a DIN rail enclosure and is available as 24Vac/dc or 230Vac powered versions. The unit comes complete with duty cycle rotation software. |
Product Features
| • Setpoint range -10°C to +110°C • Adjustable stage on/off delay time • Adjustable differential per stage • 24Vac/dc or 230Vac versions
| • LCD display of temperature, setpoint etc • DIN rail enclosure • Setback input • Duty cycle rotation software
|
Power Supply AX-CN-STx-24
| 24Vac 280mA or 24Vdc 110mA ±15%
| Power supply AX-CN-STx-230
| 230Vac ±15%
| Input Sensor
| 10K3A1 ( See Axio temperature sensor range )
| Input Remote Setpoint
| 1-11kO ( For ± 4°C or ±20°C )
| Input Setback
| volt free timer input (Close contact to activate setback)
| LCD Display
| 2 lines by 8 characters
| Temperature Range
| -20°C to +120°C
| Stage Selection
| CCCCCC, CCCCCH, CCCCHH, CCCHHH, CCHHHH, CHHHHH, HHHHHH. (C=cooling, H=heating)
| Setpoint
| -10°C to +110°C
| Offset
| 0 to 50°C
| Differential
| 0 to 12°C
| Setback Range
| 0 to 30°C
| On/Off delay Time
| 1 to 250 seconds
| Output Contacts
| 4 or 6 SPNO volt free relays, rated at 10A, 250Vac, resistive load
| Terminals
| Rising clamp for 0.5-2.5mm2 cable
| Dimensions & Weight
| AX-CN-ST 105(W) x 85(H) x 58(D) mm / 205 gms
| Ambient temperature range
| 0 to 50°C
| Country of origin
| United Kingdom
|
AX-CN-STx.pdf / Four or six stage on/off controller |  |
|
|
|