|
datasheetdetails
|
<< | < | AX-ARM - Analogue Rescaling Module
|
| |
|
|
The AX-ARM is an analogue rescaling module which accepts and analogue voltage or current signal and rescales it to another analogue range. Several preset ranges are jumper selectable. The top-adjust trimming potentiometers can be used to make fine adjustments to the output range for maximum flexibility . The AX-ARM can attenuate an input signal to 100%. The module also has an adjustable gain and offset. The output gain can be adjusted anywhere from 1 to 25 times the input ( the gain will vary depending on the input) on The Ax-ARM . The offset of the output can be adjusted anywhere from +/- 25 to +/- 20vdc for the module. The unit also has the ability to reverse the signal and also has a regulated DC power output to power sensors. |
Product Features
| • Field adjustable ranges
• Reverse acting or direct acting output
• LED status indicator
| • DIN rail mountign option
• Plug in terminal
|
Input Voltage
| 0 - 35Vdc at impedance 1M Ω nominal
| Input Current
| 0 - 44mA at impendance 250 Ω
| Output Voltage
| 0.25Vdc min to 20Vdc max at impedance 3300 Ω at 20V
| Outpout Current
| 0 to 44mA, maximum output load 750 Ω at 20mA
| Power supply
| 24Vdc +/- 10% or 22 to 26 Vac at 50/60Hz
| Supply current
| 200mA maximum
| Power Supply Output
| 20Vdc Nominal +/- 10% ( 30 mA max)
| Accuracy
| Less than or equal to 1% of output span over full temperature range
| Signal Gain
| 1 to 25 times ( field adjustable)
| Signal Attenuation
| 0-100% ( field adjustable)
| Signal Offset
| +/- 0.25 to 20 volts ( field adjustable)
| Signal Inversion
| 20 to 0.25V ( field adjustable
| Terminals
| 45 deg captive screw
| Ambient Temp
| 0 to 50oC
| Humidity
| 10% to 95% non condensing
| Dimensions
| 55(w) x 92.5(l) x 25(h)mm (max.)
| Weight
| 60gms (pcb only)
| Country of Origin
| U.S.A.
|
| AX-ARM.pdf / Analogue Rescaling Module |  |
|
|
|
