|
datasheetdetails
|
<< | < | AX-AVMB2 - Analogue to Modbus 2 Channels (1-IN 1-OUT)
|
| |
|
|
The AX-AVMB2 is a module that allows the integration of an analogue signal into a Modbus network. It can receive a 0-10VDC input from a sensor or device and convert it to a Modbus RTU register value. It can also generate a 0-10VDC output from a Modbus register value and send it to an actuator or device. The output is electrically separated from the rest of the circuit to prevent interference. The AX-AVMB2 is suitable for automation systems that have limited analogue options in the controller. The module can be configured using the dipswitch on the board or data registers through the Modbus network. |
Product Features
| • 1x 0-10VDC input
• LED status indications
• 1x 0-10VDC output
| • Isolated RS485 output
• DIN rail mounted
|
Supply Voltage
| 24Vac @ 50Hz ±10% or 24Vdc ±10% at 50mA max
| Input Voltage
| 0-10VDC
| Input Impedance
| >10KOhms
| Output Voltage
| 0-10VDC
| Output Impedance
| 10KOhms Min.
| Communication
|
| Protocol
| Modbus RTU protocol over RS485
| Electrical interface
| RS485 2W-cabling
| Address range
| 1-63 (settable using dipswitch), 1-247 (settable using configuration register)
| Baud rates supported
| 9600bps,19200bps,38400bps,57600bps,115200bps
| Parity
| None Odd, Even (default), (odd, none selectable via configuration register)
| Number of stop bits
| 1(default),2 (2 is selectable via configuration register)
| Isolation
| 1500VDC (60sec, <1mA leakage current) between Power and Output
| 120Ohms termination
| Available on board. Enabled using jumper
| Recommended cable
| 24AWG twisted pair shielded cable (1 pair for data and 1 conductor for common)
| Maximum devices on a network
| 32
| LED Indications
| Unit status, Communication status
| Terminals
| Two part pluggable connectors. Suitable for 28~12AWG wires.
| Ambient working conditions
| -20°C to 70°C, 0-90% RH
| Enclosure
| ABS
| Dimensions
| 104 x 130 x 55 mm
| Weight
| 100gms
| Country of origin
| United Kingdom
|
| AX-AVMB2.pdf / Analogue to Modbus 2 Channels 1IN 1OUT |  |
|
|
|
