|
datasheetdetails
|
<< | < | AX-BSLIM - Buffered Scaling Limiting and Inverting Module
|
| |
|
|
The AX-BSLIM is an analogue signal conditioning I/O module designed for use in BMS and HVAC systems. It can accept analogue control signals between 0 and 10 Volts. The input signal can be scaled up to x1.5 and down to x0.5. Anoffset voltage adjustable between 0-5V can be added to the input signal. There is also an option to limit the output signal using the LIMIT trim pot. There are four buffered outputs which can be either direct or inverted, selected using jumper. Typical Applications: Buffering one signal to control up to four actuators, VFDs etc. Scaling a retrofit transducer output to match input requirements in existing BMS controllers. |
Product Features
| • 24V AC/DC powered
• Signal Inversion
• Rising Clamp Terminals
• Signal Scaling
| • Multiple buffered outputs
• Linear voltage output
• DIN rail mounting (TS35)
|
Power Supply
| 24 V AC ± 15% . Max current consumption
| 24 V DC ± 10% . Max current consumption
| 30mA
| Input
| 0-10VDC
| Input Impedance
| >80Kohms
| Output
| 0-10V /10-0VAdjustable .See Operation.
| Output Current
| 5mA max per channel
| No of Buffered Outputs
| 4
| Offset Adjustability
| 0.00V-5.00V
| Gain Adjustability
| x0.5 to x1.5
| Limit Adjustability
| 0.00V-10.00V
| Adjustments done using
| Multi-turn potentiometers
| Output Linearity Error
| < 0.25 %
| Response time(t90)
| <600ms
| Connectors
| Screw terminal block suitable for 26 ~ 12 AWG wire connections
| Enclosure
| Self-extinguishing Poly Amide 6 E72 PCB support suitable for Din rails TS-35
| Ambient Operating Conditions
| 0°C to 50°C / 5-95%RH non-condensing
| Storage Conditions
| -20 to 70°C / 5-95%RH non-condensing
| Dimensions
| 82 (H) x 45 (W) x 43 (D) mm
| Weight
| 70gms
| Conformity
| EMC
| Country of origin
| UK
|
| AX-BSLIM.pdf / Buffered Scaling Limiting and Inverting Module |  |
|
|
|
