|
datasheetdetails
|
<< | < | AX-MPR1-2-24 - 2kW Din Mount Heating Regulator, Single Phase, 24V supply
|
| |
|
The AX-MPR1-2-24 DIN Rail mounting Power Regulator (thyristor) provides continuously adjustable control of electric heating loads from a 0-10V control input. Applications include electric heating coils, heating cables and electric furnaces. The AX-MPR1-2-24 uses solid-state switching with "zero crossing technology" for minimum RFI and provides accurate switching control. The unit features over temperature protection with automatic reset and LED indication of output operation. The module enclosure clips on to TS35 section DIN Rail. No additional heatsinks are required. |
Product Features
| • 0-10Vdc Control Input
• 2kW Nominal Heater Duty
• Neutral Pass Through Terminals
• Auto Reset Over Temperature Protection
| • 24Vac/dc Powered
• Burst-fire Control
• LED Indication of operation
• DIN Rail (TS35) Mounting
|
Input
| 0-10Vdc at 0.2mA maximum
| Nominal Heater Duty
| 2kW
| Load
| 8.7A maximum @40°C
| Disipated heat
| 12W maximum
| Power Supply
| 24Vac/dc +/-10%
| Power Consumtion
| 30mA at 24Vdc (0.72VA) or 50mA at 24Vac (1.2VA)
| Alarm Output
| 24Vac/dc (as power supply) - open-circuit when over temperature alarm is active
| Rated Supply
| 220-255Vac / 50-60Hz
| LED Indication
| ON when output is on.
| Terminals
| Rising clamp for 0.5-1.5mm² stranded or 2.5mm² solid core cable
| Ambient Temp Range
| 0 to 55°C Note; The units are rated at 40°C. If using at higher ambient temperature de-rate the units by 10% for every 5°C above 40°C.
| Dimensions
| 82x56x50mm
| Weight
| 95gms
| Country of Origin
| United Kingdom
|
| AX-MPR1-2-24.pdf / 2kW Single Phase Power Regulator 24V powered |  |
|
|
|
