datasheetdetails
|
<< | < | AX-OC-MWS-1 - Microwave Occupancy Detectors - Wall Mount
|
|
The AX-OC-MWS-1 Microwave Occupancy detectors provide automatic control of lighting, heating or ventilation loads. These units detects movement using a highly sensitive microwave detector. Low power microwave signals are emitted and the reflections measured as thesignals bounce off moving objects. The AX-OC-MWS-1 is for wall mounting applications to give detection over long distances. When movement is detected the load is turned on. An internal light sensor provides additional energy saving advantages - when an area is occupied lighting is only switched on when the level of natural light is below a preset level. Programming of the settings is only possible by use of the remote control handset. |
Product Features
| • Wall Mounting • Switched Live or Volt free contact output • Hand held programmer for fast commissioning
| • Fits standard single gand backbox • Unaffected by heat sources (unlike PIR sensors)
|
Sensor type
| Microwave and Light Level
| Field of View
| See diagram
| Power Supply
| -1 and -1VF 220-240Vac 50Hz 1.15W maximum
|
| -1LVF 11.5 to 36Vdc or 10 to 26.5Vac 1.1W maximum
| Load
| NO 6A,240Vac maximum resistive, incandescent and flourescent lighting
|
| 3A,240Vac low energy lighting, compact flourescent lighting and fans
|
| -VFC NC 2A,240Vac maximum resistive
| Delay Timer
| Adjustable 10 seconds to 99 minutes
| Electrical Connections
| 2.5mm²
| Ambient Temp. Range
| -10 to + 35°C
| Materials
| Flame retardant ABS
| Microwave Radiation
| Extremely low power complies with ANSI IEEE95.1-1999
| Microwave frequency
| 10.687GHz approved for use in UK, Middle East, China, India (alternative frequencies available for other countries)
| Conformity
| EMC 2004/108/EC, LVD 2006/95/EC
| Country of Origin
| United Kingdom
|
AX-OC-MWS-1.pdf / Microwave Occupancy Detectors |  |
|
|
|