|
datasheetdetails
|
<< | < | AX-RLA-230-ACT-X - 230V Raise Lower to Analogue converter
|
| |
|
|
The Axio AX-RLA-230-ACT-X converts 230Vac raise-lower input signals into a 0-10 volt analogue output. The unit provides various cycle times that are jumper selectable. The AX-RLA-230-ACT-X also provides a 24Vac supply for valve actuators, etc. to simplify cabling. The unit features a manual preset for commissioning purposes. The module is supplied in a DIN rail carrier suitable for mounting on TS35 section DIN rail and features high quality rising clamp terminals for ease of connection. |
Product Features
| • 230Vac Raise Lower Inputs
• 24Vac output at 5.5,9 or 12VA
• Manual override preset for commissioning
| • Selectable cycle times
• 230Vac powered
• DIN rail carrier (TS35 DIN rail)
|
Supply voltage
| 230Vac (+/-15%), 50-60Hz
| Inputs (Raise and Lower)
| 230Vac (+/-15%), 50-60Hz
| Input load
| 2mA maximum (note if triacs are used to switch the inputs, the triacs must be able to switch on and off correctly at 1.5mA)
| Raise-Lower timing
| 30 to 300 Seconds – see table 1
| Analogue output
| 0 - 10Vdc at 5mA maximum load
| Power output
| 24Vac at 5.5VA/9VA/12VA maximum. Typical regulation 25%
| Fuse
| Transformer output protection - 250mA/500mA/1A anti-surge
| Terminals
| Rising clamp for 0.5-1.5mm² cable
| Ambient temperature range
| 0°C to 50°C
| Dimensions
| 68(W) x 83(H) x 58(D) mm (Maximum)
| Country of origin
| United Kingdom
|
| AX-RLA-230-ACT-X.pdf / Raise-Lower to Analogue converter |  |
|
|
|
