datasheetdetails
|
<< | < | AX-RM3M - Three Stage Relay Module
|
|
The Axio AX-RM3M converts a 0-10Vdc or 2-10Vdc control signal into a 3 relay output with 7 selectable modes: Stage, Sequence, Heat/Cool/Fan, Binary, Circular, Power-on stage and Power-on sequence. In certain modes the output sequence can be reversed. The module is powered by 24Vac or 24Vdc and jumpers for Auto/Hand/Off are provided to aid commissioning with individual LEDs to indicate the relay states. The AX-RM3M is supplied in a DIN rail carrier for mounting on TS35 section DIN rail and features high quality rising clamp terminals for ease of connection. |
Product Features
| • 0-10 or 2-10 volt input • 3 SPCO relays • Step and reverse options • Adjustable reaction time
| • Binary output • DIN rail carrier as standard (TS35 DIN rail) • High quality rising clamp terminals
|
Input signals
| Control 0-10Vdc or 2-10Vdc at 1mA maximum
|
| Reverse Volt free contact to switch 0.5mA
| Output contacts
| 3 SPCO relays. NO contact 12A, NC contact 3A, 250Vac resistive load
| Power supply
| 24Vac ±10% at 140mA maximum
|
| 24Vdc ±10% at 100mA maximum
| Modes of operation
| 7 modes, see Mode table
| Manual override
| Auto / Hand (On) / Off
| LED indicators
| On when relay energised
| Time delay
| 0-60 seconds
| Settling time
| 0.1 or 1 seconds
| Step mode
| Sequence through intermediate steps
| Terminals
| Rising clamp for 0.5-2.5mm2 cable
| Ambient temperature range
| 0°C to 50°C
| Dimensions / Weight
| 68(W) x 82(H) x 43(D) mm / 100 gms
| Country of origin
| United Kingdom
|
AX-RM3M.pdf / Three Stage Relay Module | |
|
|
|