|
datasheetdetails
|
<< | < | AX-UL-SEP-xx-x - Ultrasonic Level Sensor
|
| |
|
The AX-UL-SEP-xx-x is a range of Ultrasonic level sensors designed for level measurement in tanks orsumps and provides a 4-20mA output to the BMS system or alarm. The unit uses non-intrusive ultrasonicpulse technology so any liquid can be measured. The unit is housed in a IP68 housing and is fixed to the top of the tank. Set-up is by means of push buttons to set up the full/empty levels. There are two standard ranges 6m and 8m. There is the option of a relay and/or an LCD Display and fully functioned programming module. |
Product Features
| • Non Intrusive Design
• Easy to set-up
| • Mounted on the top of a tank
• Built in temperature compensation
|
Measuring Range
| SEP-380 0.25 to 6.0m
|
| SEP-370 0.35 to 8.0m
| Process Temperature
| -30 to +90 degC
| Power Supply
| 12 to 36Vdc 720mW
| Output
| 4-20mA loop (600 Ohm)
| Digital Communications
| (option) Hart
| Integral Relays
| (option) 1 x SPDT 1A@30Vdc
| Operating Pressure
| 0.3 to 3bar
| Beam Angle
| SEP-380 5 deg
|
| SEP-370 7deg
| Accuracy
| 0.05% of range +/- 0.2% measured distance
| Resolution
| 2 to 5m <2mm
| Display
| (Optional) SAP-200 LCD Display - fully featured programming configuration and optimisation 11 tank shapes, 21 open channels
| Weatherproof Rating
| Housing IP67
|
| Sensor IP68
| Materials
| Polypropylene as standard (PVDF or EPDM option at additional cost)
| Mounting
| 2" BSP (NPT Option)
| Electromagnetic Compatability
| EN61326 Class B
| Country of Origin
| EU
|
| AX-UL-SEP-xx-x.pdf / Ultrasonic Level Sensor |  |
|
|
|
