Annicom Axio Logo  
home | about us | products | datasheets | account
 <<  |  <  |   AX-WAC - Three channel window actuator controller with LCD
AX-WAC / 3 channel Window actuator controller with LCD display POA Qty

The Axio AX-WAC is a 3 channel window controller providing timed forward/reverse outputs to open and close 2 wire DC window actuators. Each output can be driven from a separate 0-10 volt input, or grouped as described below, including a linear option. Cycle times from 5 to 240 seconds can be set or the window opening time can be measured. A 'Close All' input is provided to drive all windows closed overriding the control inputs. The AX-WAC is supplied in a DIN rail carrier as standard suitable for mounting on TS35 section DIN rail. The module features high quality rising clamp terminals for ease of connection.
Product Features
3 independent forward/reverse outputs
5 to 240 second cycle time ranges
Close All input to close all windows
Staggered actuator switching available
Independent, grouped or linear modes
0-5, 2-10 or 0-10 volt input range selection
Selectable output step count
Selectable reset options

Control supply voltage
24Vdc 15%, 90mA
3 control input, 0-10, 2-10 or 0-5 volts, 2mA maximum.

Close All input, volt free contact, 0.5mA maximum.

Actuator supply voltage, 12-24Vdc as required by actuators.
8 character by 2 line display
Menu options
Input range

Control mode

Output switching

Cycle time

Output step count

Output reset time
3 Forward/Reverse actuator outputs protected by self resetting fuses. Maximum 5A each output, total maximum 15A. (Resistive)
Rising clamp for 0.5-2.5mm2 cable
Ambient temperature range
0C to 50C
102(W) x 83(H) x 48(D) mm (Maximum)
Country of origin
United Kingdom

AX-WAC.pdf / Three channel window actuator controller with LCD